- Applications
- Main uses are for thin plate stainless steels and for the welding of automotive mufflers in 22%Cr-12%Ni stainless steels.
- Characteristics on Usage
-
- - WT-M309L is a metal type stainless steel flux cored wire for welding of 22%Cr-12%Ni steel, heat resistant cast steel and for the joining of chrome nickel clad steels to Cr-Mo steel or mild steel. This wire is designed for flat and horizontal fillet welding.
- - It is weld metal contains ferrite in austenitic structure, it gives excellent weldability, good corrosion and heat resistance.
- Notes on Usage
-
- - The shielding gas should be used Ar+2~5% O2 for welding.
- - Gas flow rate is proper 20~25ℓ /min.
- Sizes Available and Recommended Currents ( DC + )
-
Sizes Available and Recommended Currents ( DC + )
Dia(mmØ) |
Current(A) |
Voltage(V) |
Electrode extension(mm) |
1.2 |
170~270 |
25~30 |
10~20 |
1.6 |
200~350 |
25~33 |
15~25 |
- Typical Chemical Composition of All-Weld-Metal (wt%) (Shielding gas :MIX
-
Typical Chemical Composition of All-Weld-Metal (wt%)
C |
Mn |
Si |
P |
S |
Cr |
Ni |
0.03 |
1.17 |
0.55 |
0.020 |
0.009 |
24.1 |
12.6 |
- Typical Mechanical Properties of All-Weld-Metal (Shielding gas : MIX)
-
Typical Mechanical Properties of All-Weld-Metal
Y.S MPa |
T.S MPa |
EL(%) |
IV J (-20℃) |
440 |
575 |
42 |
58 |
- Welding position