- Applications
- WT-307P is designed for welding dissimilar steels, 13% Mn steels with reduced weldability and for cladding carbon steels.
- Characteristics on Usage
-
- - 307P is a rutile type flux cored wire with a hot cracking resistant austenitic weld metal.
- - The weld metal has an excellent crack resistance, even when welding steels with very poor weldability.
- - This wire is designed for welding dissimilar steels, 13Mn steels with reduced weldability and for cladding carbon steels. Can also be used as a buffer layer prior to hard surfacing.
- Notes on Usage
-
- - The shielding gas should be used 100%CO2 or Ar+20~25%CO2 for welding
- - Welders for solid wire can be used but as wire is softer than solid wire, pay full attention
to adjust feeding roller and do not tighten them excessively.
- Sizes Available and Recommended Currents ( DC + )
-
Sizes Available and Recommended Currents ( DC + )
Dia(mmØ) |
Current(A) |
Voltage(V) |
Electrode extension(mm) |
1.2 |
170~270 |
25~30 |
10~20 |
1.6 |
200~350 |
25~30 |
15~25 |
- Typical Chemical Composition of All-Weld-Metal (wt%) (Shielding gas : CO2)
-
Typical Chemical Composition of All-Weld-Metal (wt%)
C |
Mn |
Si |
P |
S |
Cr |
Ni |
Mo |
0.08 |
4.09 |
0.81 |
0.022 |
0.009 |
19.01 |
9.45 |
0.82 |
- Typical Mechanical Properties of All-Weld-Metal (Shielding gas : CO2)
-
Typical Mechanical Properties of All-Weld-Metal (Shielding gas : Ar)
Y.S MPa |
T.S MPa |
EL(%) |
IV J (-20℃) |
476 |
594 |
40 |
86 |
- Welding positions
- Approved by
- JIS