- Applications
- It is designed for welding of 490MPa high tensile steels with Ar+20%CO2 shielding gas.
Typical applications include railcar, automotive machinery, shipbuilding, bridges, heavy equipment etc.
- Characteristics on Usage
-
- - It is a rutile type flux cored wire for all-position welding.
- - It features excellent mechanical properties, easy slag removal, low spatter generation.
- - It is designed good impact value at low temperatures down to -40°C in PWHT conditions.
- Notes on Usage
-
- - Proper preheating (50~150°C) (122~302° F) and interpass temperature must be used in order to release hydrogen which may cause cracking in weld metal when electrodes are used for medium and heavy plates.
- - One-side welding defects such as hot cracking may occur with wrong welding parameter such as high welding speed.
- - Gas flow rate is proper 20~25ℓ/min.
- - Shielding gas should be used Ar+20~25%CO2.
- Sizes Available and Recommended Currents ( DC +)
-
용착금속의 기계적 성질의 일례
Dia(mmØ) |
1.2 |
1.4 |
1.6 |
Position |
F |
Amp |
120~300A |
150~350A |
180~400A |
HF |
120~300A |
150~350A |
180~400A |
V-up, OH |
120~260A |
150~270A |
180~280A |
- Typical Chemical Composition of All-Weld-Metal (wt%) (Shielding gas : MIX)
-
용착금속의 기계적 성질의 일례
C |
Mn |
Si |
P |
S |
Ni |
0.04 |
1.42 |
0.50 |
0.012 |
0.014 |
0.37 |
- Typical Mechanical Properties of All-Weld-Metal ( Shielding gas : MIX)
-
용착금속의 기계적 성질의 일례
Y.S MPa |
T.S MPa |
EL(%) |
CVN-Impact Value J (-60℃) |
PWHT |
582 |
611 |
30 |
120 |
AW |
516 |
586 |
30 |
102 |
620℃×2hr |
- Welding position